 |
KS-16508 - Tornado Series Electric Fan: 8"
Tornado Fans
. REVERSIBLE - Can be mounted as a Pusher or a Puller with no airflow loss. It's patented blade design allows for greater efficiency
. Ultra-quiet operation and low amp draw
. Comes complete with hardware kit and features 7sizes to fit any application
. Thermostatic switch's available here
#16508, 8" Diameter, 400 CFM, 2700 RPM, 4.8 Amp draw. |
 |
|
|
KS-16509 - Tornado Series Electric Fan: 9"
Tornado Fans
. REVERSIBLE - Can be mounted as a Pusher or a Puller with no airflow loss. It's patented blade design allows for greater efficiency
. Ultra-quiet operation and low amp draw
. Comes complete with hardware kit and features 7sizes to fit any application
. Thermostatic switch's available here
#16509, 9" Diameter, 570 CFM, 2700 RPM, 5.4 Amp draw. |
|
|
|
KS-16510 - Tornado Series Electric Fan: 10"
Tornado Fans
. REVERSIBLE - Can be mounted as a Pusher or a Puller with no airflow loss. It's patented blade design allows for greater efficiency
. Ultra-quiet operation and low amp draw
. Comes complete with hardware kit and features 7sizes to fit any application
. Thermostatic switch's available here
#16510, 10" Diameter, 650 CFM, 2700 RPM, 5.3 Amp draw. |
|
|
|
KS-16512 - Tornado Series Electric Fan: 12"
Tornado Fans
. REVERSIBLE - Can be mounted as a Pusher or a Puller with no airflow loss. It's patented blade design allows for greater efficiency
. Ultra-quiet operation and low amp draw
. Comes complete with hardware kit and features 7sizes to fit any application
. Thermostatic switch's available here
#16512, 12" Diameter, 6880 CFM, 2100 RPM, 8.8 Amp draw. |
|
|
|
|
 |
KS-16738 - Single Stage Electric Fan Thermostat: 180 Degree; Turn On
Single Stage Fan Controller
.180 degree turn-on temperature, turn-off is 170 degrees
. Two probes available, 3/8" NPT water jacket thread-in or push-in radiator fin probe
. 30/40 Amp heavy-duty relay included in kit, necessary if electric fan draws over
10 Amps
. A/C override circuit included
. Designed for dual fans
. Maximum capacity: 25 Amps
#16738 Single stage controller, push-in radiator fin probe |
|
|
|
KS-16516 - Tornado Series Electric Fan: 16"
Tornado Fans
. REVERSIBLE - Can be mounted as a Pusher or a Puller with no airflow loss. It's patented blade design allows for greater efficiency
. Ultra-quiet operation and low amp draw
. Comes complete with hardware kit and features 7sizes to fit any application
. Thermostatic switch's available here
#16516, 16" Diameter, 2175 CFM, 1680 RPM, 18.4 Amp draw. |
|
|
|
|
|
KS-16514 - Tornado Series Electric Fan: 14"
Tornado Fans
. REVERSIBLE - Can be mounted as a Pusher or a Puller with no airflow loss. It's patented blade design allows for greater efficiency
. Ultra-quiet operation and low amp draw
. Comes complete with hardware kit and features 7sizes to fit any application
. Thermostatic switch's available here
#16514, 14" Diameter, 1350 CFM, 1750 RPM, 10.5 Amp draw. |
|
|
|
|
|
|
 |
13010 - Transmission Pan Drain Plug Kit
Universal weld in transmission pan drain plug kit. This is a great way to add a drain plug to that race car tranny pan. Simply remove the pan, drill a hole for the plug, weld the nut to the inside and reinstall. |
|
|
|
|
|
|
|
|
|
|
|
|
 |
KS-13071 - FUEL FILTER & H20 SEPERATOR KIT
Fuel Filter and water seperator kit. This is a great addition to your diesel truck, or your racing boat! I used to run a similar system on my Big-Block powered racing Jet boat and had great results with the system. Simply change out filters a couple times a season and your covered! |
|
|
 |
41.99 - Transmission Filter Kit: Standard; Includes Filter
Transmission Filter Kit: Standard; Includes Filter. Remove the contaminates and silicates from your transmission fluid. The stock filter stops large objects, but with this filter you can really filter the fluid to an as new condition! Everything needed is included for the average install. You may be required to find fittings for your particular application. |
|
|
 |
KS-13101 - Derale Series 7000 Fluid Cooler, Transmission, Tube and Fin, Alu
Transmission cooling made easy.
Derale's tube and fin direct-fit transmission coolers feature 1/2 in. seamless copper tubes with Turbulator inserts, expanded into louvered 3/4 in. aluminum cooling fins for maximum heat extraction. They are equipped with pre-drilled steel mounting brackets for solid vehicle attachment, and have all necessary mounting hardware and instructions for a simple hand tool installation. The coolers are available for a variety of vehicles and include the appropriate adapter.
Overall Height (in): 5.000 in.
Overall Width (in): 12.000 in.
Overall Thickness (in): 0.750 in.
Cooler Construction: Tube and fin
Cooler Material: Copper/Aluminum
Inlet Size: 11/32 in.
Inlet Attachment: Hose barb
Outlet Size: 11/32 in.
Outlet Attachment: Hose barb
Number of Cooling Rows: 4
Core Height (in): 5.000 in.
Core Width (in): 9.000 in.
Core Thickness (in): 0.750 in.
Cooler Finish: Black painted
Quantity: Sold individually. |
|
|
|
KS-13103 - Derale Series 7000 18,000 LB Fluid Cooler, Transmission, Tube an
Transmission cooling made easy.
Derale's tube and fin direct-fit transmission coolers feature 1/2 in. seamless copper tubes with Turbulator inserts, expanded into louvered 3/4 in. aluminum cooling fins for maximum heat extraction. They are equipped with pre-drilled steel mounting brackets for solid vehicle attachment, and have all necessary mounting hardware and instructions for a simple hand tool installation. The coolers are available for a variety of vehicles and include the appropriate adapter for most applications. Some vehicles require additional addapters available at any local hardware store.
Overall Height (in): 7.500 in.
Overall Width (in): 17.000 in.
Overall Thickness (in): 0.750 in.
Cooler Construction: Tube and fin
Cooler Material: Copper/Aluminum
Inlet Size: 11/32 in.
Inlet Attachment: Hose barb
Outlet Size: 11/32 in.
Outlet Attachment: Hose barb
Number of Cooling Rows: 6
Core Height (in): 7.500 in.
Core Width (in): 14.000 in.
Core Thickness (in): 0.750 in.
Cooler Finish: Black painted
Quantity: Sold individually. |
|
|
 |
KS-13104 - Derale Series 7000, 20,500 GVW, 10"x17"x3/4"
Transmission cooling made easy.
Derale's tube and fin direct-fit transmission coolers feature 1/2 in. seamless copper tubes with Turbulator inserts, expanded into louvered 3/4 in. aluminum cooling fins for maximum heat extraction. They are equipped with pre-drilled steel mounting brackets for solid vehicle attachment, and have all necessary mounting hardware and instructions for a simple hand tool installation. The coolers are available for a variety of vehicles and include the appropriate adapter for most applications. Some vehicles require additional addapters available at any local hardware store.
Series 7000 Tube & Fin Cooler Kits
Series 7000 coolers offer the best quality and value in a tube and fin cooler. Eight sizes are available for maximum application coverage. Kits include OEM-spec high temperature oil hose, nylon mounting rods and metal mounting strips, insta-dapt 2-way radiator adapter, stainless steel hose clamps and mounting and installation instructions. High impact 4-color display packaging with point-of-sale consumer information.
. Prevents heat related transmission failures
. Extends transmission and fluid life
. Improves transmission performance
. Seamless 1/2" copper tubing expanded into aluminum cooling fins for maximum heat transfer
. Turbulator fins inserted in each tube agitate fluid for heat transfer
. Black powder-coat finish and plastic fin guards protect cooler during installation |
|
|
|
KS-13105 - Derale Series 7000, 22,500 GVW, 12 1/2"x17"x3/4"
Transmission cooling made easy.
Derale's tube and fin direct-fit transmission coolers feature 1/2 in. seamless copper tubes with Turbulator inserts, expanded into louvered 3/4 in. aluminum cooling fins for maximum heat extraction. They are equipped with pre-drilled steel mounting brackets for solid vehicle attachment, and have all necessary mounting hardware and instructions for a simple hand tool installation. The coolers are available for a variety of vehicles and include the appropriate adapter for most applications. Some vehicles require additional addapters available at any local hardware store.
Series 7000 Tube & Fin Cooler Kits
Series 7000 coolers offer the best quality and value in a tube and fin cooler. Eight sizes are available for maximum application coverage. Kits include OEM-spec high temperature oil hose, nylon mounting rods and metal mounting strips, insta-dapt 2-way radiator adapter, stainless steel hose clamps and mounting and installation instructions. High impact 4-color display packaging with point-of-sale consumer information.
. Prevents heat related transmission failures
. Extends transmission and fluid life
. Improves transmission performance
. Seamless 1/2" copper tubing expanded into aluminum cooling fins for maximum heat transfer
. Turbulator fins inserted in each tube agitate fluid for heat transfer
. Black powder-coat finish and plastic fin guards protect cooler during installation |
|
|
|
KS-13107 - Derale Series 7000, 18,200 GVW, 10"x12"x3/4"
Transmission cooling made easy.
Derale's tube and fin direct-fit transmission coolers feature 1/2 in. seamless copper tubes with Turbulator inserts, expanded into louvered 3/4 in. aluminum cooling fins for maximum heat extraction. They are equipped with pre-drilled steel mounting brackets for solid vehicle attachment, and have all necessary mounting hardware and instructions for a simple hand tool installation. The coolers are available for a variety of vehicles and include the appropriate adapter for most applications. Some vehicles require additional addapters available at any local hardware store.
Series 7000 Tube & Fin Cooler Kits
Series 7000 coolers offer the best quality and value in a tube and fin cooler. Eight sizes are available for maximum application coverage. Kits include OEM-spec high temperature oil hose, nylon mounting rods and metal mounting strips, insta-dapt 2-way radiator adapter, stainless steel hose clamps and mounting and installation instructions. High impact 4-color display packaging with point-of-sale consumer information.
. Prevents heat related transmission failures
. Extends transmission and fluid life
. Improves transmission performance
. Seamless 1/2" copper tubing expanded into aluminum cooling fins for maximum heat transfer
. Turbulator fins inserted in each tube agitate fluid for heat transfer
. Black powder-coat finish and plastic fin guards protect cooler during installation |
|
|
 |
KS-13210 - Derale Power Steering Cooler
Part # 13210, 2 1/2" x 7 3/4"x 3/4"
Power Steering Coolers
. Extends Pump and Seal Life
. Reduces Heat Related Pump Failure
. Includes Complete Installation Kit
. 11/32" Push-on Inlets |
|
|
 |
KS-132120 - Derale Power Steering Frame Rail Mounted Cooler
Part # 13220, 17" Cooler Kit, 11/32" Barb.
1 1/2" x 17"; 11/32" inlet
Power Steering Coolers
. Extends Pump and Seal Life
. Reduces Heat Related Pump Failure
. Includes Complete Installation Kit
. 11/32" Push-on Inlets
Frame Rail Cooler
. 1-1/2" height allows mounting on frame rail near transmission or anywhere there is room
. 12", 17" and 24" lengths to fit most street rods and muscle cars
. 1" offset brackets provide 360 degree airflow through cooler
. Hardware kit included on all kit part numbers |
|
|
|
KS-13221 - Derale Power Steering Frame Rail Mounted Cooler AN6
Part # 13221, 1 1/2" x 17"; AN-6 inlet
Power Steering Coolers
. Extends Pump and Seal Life
. Reduces Heat Related Pump Failure
. Includes Complete Installation Kit
Frame Rail Cooler
. 1-1/2" height allows mounting on frame rail near transmission or anywhere there is room
. 12", 17" and 24" lengths to fit most street rods and muscle cars
. 1" offset brackets provide 360 degree airflow through cooler
. Hardware kit included on all kit part numbers |
|
|
|
KS-13222 - Derale Power Steering Frame Rail Mounted Cooler 11/32" Inlet
Part # 13222, 12" Cooler Kit, 11/32" Barb.
1 1/2" x 12"; 11/32" inlet
Power Steering Coolers
. Extends Pump and Seal Life
. Reduces Heat Related Pump Failure
. Includes Complete Installation Kit
Frame Rail Cooler
. 1-1/2" height allows mounting on frame rail near transmission or anywhere there is room
. 12", 17" and 24" lengths to fit most street rods and muscle cars
. 1" offset brackets provide 360 degree airflow through cooler
. Hardware kit included on all kit part numbers |
|
|
|
KS-13224 - Derale 24" Long Power Steering Frame Rail Mounted Cooler 11/32"
Part # 13224, 24" Cooler Kit, 11/32" Barb.
Power Steering Coolers
. Extends Pump and Seal Life
. Reduces Heat Related Pump Failure
. Includes Complete Installation Kit
Frame Rail Cooler
. 1-1/2" height allows mounting on frame rail near transmission or anywhere there is room
. 12", 17" and 24" lengths to fit most street rods and muscle cars
. 1" offset brackets provide 360 degree airflow through cooler
. Hardware kit included on all kit part numbers |
|
|
|
KS-13225 - Derale 24" Long Power Steering Frame Rail Mounted Cooler AN6
Part # 13225, 24" Cooler Kit, AN6 Fitting.
Power Steering Coolers
. Extends Pump and Seal Life
. Reduces Heat Related Pump Failure
. Includes Complete Installation Kit
Frame Rail Cooler
. 1-1/2" height allows mounting on frame rail near transmission or anywhere there is room
. 12", 17" and 24" lengths to fit most street rods and muscle cars
. 1" offset brackets provide 360 degree airflow through cooler
. ***NO HARDWARE KIT***CORE ONLY*** |
|
|
 |
KS-13251 - Single Pass Heat Sink Power Steering Cooler, 15"
Heat Sink Coolers
. Heat sink design produces high heat transfer with minimal airflow
. External and internal heat dissipating fins
. Compact 3" diameter core can be mounted in a variety of locations,
frame rail, radiator bottom and floor boards
. Can cool transmission fluid, fuel, engine oil, power steering,
or gear lube
. Complete hardware kit included on all kit part numbers |
|
|
|
KS-13252 - Single Pass Heat Sink Power Steering Cooler, 18"
Heat Sink Coolers
. Heat sink design produces high heat transfer with minimal airflow
. External and internal heat dissipating fins
. Compact 3" diameter core can be mounted in a variety of locations,
frame rail, radiator bottom and floor boards
. Can cool transmission fluid, fuel, engine oil, power steering,
or gear lube
. Complete hardware kit included on all kit part numbers |
|
|
 |
KS-13303 - Derale Series 7000 18,500 LB Fluid Cooler, Transmission, Tube an
Series 7000 Heavy Duty Transmission Cooler Kit: 18500 GVW; AN-6 Inlets; 7 1/2" x 17" x 3/4"
Transmission cooling made easy.
Derale's tube and fin direct-fit transmission coolers feature 1/2 in. seamless copper tubes with Turbulator inserts, expanded into louvered 3/4 in. aluminum cooling fins for maximum heat extraction. They are equipped with pre-drilled steel mounting brackets for solid vehicle attachment, and have all necessary mounting hardware and instructions for a simple hand tool installation. The coolers are available for a variety of vehicles and include the appropriate adapter for most applications. Some vehicles require additional addapters available at any local hardware store.
Heavy Duty Tube & Fin Cooler Kits
. AN-6 Male Ports
. Rubber Hose With Swedged Hose Ends
. Leak Proof Threaded Inlets
. Complete Hardware Kit Included |
|
|
|
KS-13304 - Derale Series 7000 20,500 LB Fluid Cooler, Transmission, Tube an
Series 7000 Heavy Duty Transmission Cooler Kit: 20500 GVW; AN-6 Inlets; 10" x 17" x 3/4"
Transmission cooling made easy.
Derale's tube and fin direct-fit transmission coolers feature 1/2 in. seamless copper tubes with Turbulator inserts, expanded into louvered 3/4 in. aluminum cooling fins for maximum heat extraction. They are equipped with pre-drilled steel mounting brackets for solid vehicle attachment, and have all necessary mounting hardware and instructions for a simple hand tool installation. The coolers are available for a variety of vehicles and include the appropriate adapter for most applications. Some vehicles require additional addapters available at any local hardware store.
Heavy Duty Tube & Fin Cooler Kits
. AN-6 Male Ports
. Rubber Hose With Swedged Hose Ends
. Leak Proof Threaded Inlets
. Complete Hardware Kit Included |
|
|
|
KS-13502 - DERALE Series 8000 Plate and Fin Transmission Cooler: 17500 GVW
Cool upgrade.
Series 8000 Plate and Fin Transmission Cooler: 17500 GVW; 7 1/2" x 11" x 3/4".
Derale OEM-style transmission coolers were designed with high efficiency for the high heat extraction requirements of today's electronic overdrive transmissions. They have 100 percent aluminum construction and require 30 percent less space than a typical tube/fin system. They come in four sizes to fit most any application, and include a complete installation kit with easy-to-follow instructions.
Series 8000 Tube & Plate Cooler Kits
. Designed for late model electronic overdrive transmissions
. 3/4" wide embossed turbulator plates minimize pressure drop
. Sturdy furnace brazed aluminum construction
. Complete mounting and installation kit including nylon & metal mounts |
|
|
|
KS-13503 - DERALE Series 8000 Transmission Cooler Kit: 20500 GVW
Cool upgrade.
Series 8000 Transmission Cooler Kit: 20500 GVW; 9 3/4" x 11" x 3/4"
Part # 13503
Derale OEM-style transmission coolers were designed with high efficiency for the high heat extraction requirements of today's electronic overdrive transmissions. They have 100 percent aluminum construction and require 30 percent less space than a typical tube/fin system. They come in four sizes to fit most any application, and include a complete installation kit with easy-to-follow instructions.
Series 8000 Tube & Plate Cooler Kits
. Designed for late model electronic overdrive transmissions
. 3/4" wide embossed turbulator plates minimize pressure drop
. Sturdy furnace brazed aluminum construction
. Complete mounting and installation kit including nylon & metal mounts |
|
|
|
KS-13504 - DERALE Series 8000 Transmission Cooler Kit: 22500 GVW
Cool upgrade.
Series 8000 Transmission Cooler Kit: 22500 GVW; 11 1/4" x 11" x 3/4"
Part # 13504
Derale OEM-style transmission coolers were designed with high efficiency for the high heat extraction requirements of today's electronic overdrive transmissions. They have 100 percent aluminum construction and require 30 percent less space than a typical tube/fin system. They come in four sizes to fit most any application, and include a complete installation kit with easy-to-follow instructions.
Series 8000 Tube & Plate Cooler Kits
. Designed for late model electronic overdrive transmissions
. 3/4" wide embossed turbulator plates minimize pressure drop
. Sturdy furnace brazed aluminum construction
. Complete mounting and installation kit including nylon & metal mounts |
|
|
 |
KS-13720 - Electra Cool Remote Cooler: 8 Pass; AN-6 Inlets; 10" x 16" x 3 7
8 Pass Electra-Cool Remote Cooler
The Electra-cool Remote Cooler combines a copper/aluminum core with a high flow Tornado electric fan for maximum cooling in any environment. Cooler cores have either AN-6 (3/8" ID) or AN-8 (1/2" ID) inlets, hose barb adapters are included if not using AN hose. Overall size 10" tall, 12-1/2" wide and 4" thick. Cooler kits include fan, cooler core and aluminum brackets only. Complete kits also include fan control thermostat, 10' of hose, mounting hardware and adapter fittings.
. Can be mounted anywhere
. Electric fan supplies optimum airflow
. Large capacity tube and fin cooler core
. 650 CFM 10" dia. reversible Tornado fan
. Anodized aluminum mounting brackets
. 16 Pass rated at 25,000 GVW
. 8 Pass rated at 17,500 GVW
Be sure your fluids are not overheating.
Derale's Electra-Cool remote fluid coolers combine a high-capacity oil-cooler core with a Tornado 10-inch electric fan for maximum cooling in any environment. This superior combination will give you the peace of mind of knowing that your fluids will be at their prime operating temperatures. These coolers feature a core with 1/2 in. copper tubes and 3/4 in. aluminum fins with plastic edge-guard protectors, all with a durable black powdercoat finish. Each fan is solidly mounted to the cooler core with clear-anodized billet-aluminum brackets to ensure a stable attachment. Coolers come in 8- or 16-pass models, with your choice of AN-type inlets and outlets. You can make these coolers even better with the fan thermostats and installation kits that are sold separately. |
|
|
|
KS-13730 - Econo Cool Remote Cooler: 6 Pass; 11/32" Inlets; 7 1/2" x 12" x
6 Pass Electra-Cool Remote Cooler
Econo Cool Remote Cooler: 6 Pass; 11/32" Inlets; 7 1/2" x 12" x 3 7/8"
Econo-Cool Remote Cooler
Our Econo-cool Remote Coolers combine a 6-pass, high-efficiency oil cooler core with a 400 CFM 7" Tornado electric fan for maximum cooling in a small package. The cooler core features 1/2" copper tubes and 3/4" aluminum fins with plastic edge guard protectors and comes with a black powder-coated finish. The electric fan mounts solidily to the cooler core with clear anodized billet aluminum brackets. 15,500 GVW. Installation kits and in-line fan thermostat sold separately.
Over all size" 7-1/2" x 12" x 3-7/8"
. Can be mounted anywhere
. Electric fan supplies optimum airflow
. High efficiency "Radiator Syle" fin and plate cooler core
. 400 CFM 7" dia. reversible Tornado fan
. Anodized aluminum mounting brackets
. Rated at 15,500 GVW
Big cooling in small spaces.
Looking for maximum fluid cooling that takes up minimal space? Derale's Econo-Cool remote fluid coolers are designed for just that dilemma. They combine a six-pass, high-efficiency fluid-cooler core with a 400-cfm, seven-inch Tornado electric fan for excellent cooling in a small package. Their cooler core features 1/2 in. copper tubes and 3/4 in. aluminum fins with plastic edge-guard protectors, all with a durable black powdercoat finish. Fans are solidly mounted to the cooler core with clear-anodized billet-aluminum brackets to ensure a stable attachment. These coolers work well with fan thermostats and installation kits that are sold separately. |
|
|
 |
13750 - Atomic-Cool Remote Cooler: Fan Mounted Oil Cooler; AN-6 Male Inl
Atomic-Cool Remote Cooler: Fan Mounted Oil Cooler; AN-6 Male Inlets.
The Atomic-cool Remote Cooler provides the largest temperature drop of any fan mounted cooler. The fin and plate design maximizes heat dissipation and minimizes oil pressure drop, especially important on late model electronic overdrive transmissions. Cooler core has either AN-6 (3/8" ID) or AN-8 (1/2" ID) inlets, hose barb adapters are included if not using AN hose. Overall size 10" tall, 12-1/2" wide and 4" thick. Cooler kits include fan, cooler core and aluminum brackets only. Complete kits also include fan control thermostat, 10' of hose, mounting hardware and adapter fittings.
. Can be mounted anywhere
. Electric fan supplies optimum airflow
. High efficiency "Radiator Syle" fin and plate cooler core
. 400 CFM 8" dia. reversible Tornado fan
. Anodized aluminum mounting brackets
. Rated at 26,500 GVW
Quality cooling from a quality name.
Why compromise your engine or transmission's life when you can insure it with Derale Atomic-Cool remote fluid coolers. These efficient coolers provide the largest temperature drop of any of Derale's fan-equipped coolers. Their fin-and-plate design minimizes pressure drops, even with high-viscosity oils; and the attached electric fan provides optimum heat extraction regardless of mounting location. Atomic-Cool coolers come with several styles of inlet and outlet fittings, including hose-barb adapters. You can make these coolers work even better with the fan thermostats and installation kits that are sold separately. |
|
|
 |
14100 - Transmission Pan Cooler: GM Turbo 350; 2.75" Depth
Double your transmission's life.
A Derale transmission pan can double your transmission's life by dropping its temperature 20 to 50 degrees. These pans hold about one extra quart of fluid and have heat-conducting metal tubes on the bottom. A replacement gasket is included. Adds 1 QT and 8oz. of capacity to your transmission as well. |
|
|
 |
KS-14102 - Transmission Pan Cooler: GM Turbo 400 Deep Pan; 3.875" Depth
Derale Transmission Pan Coolers use the air flowing beneath the vehicle to reduce fluid temperatures from 20°F to 50°F. Features include heavy-gauge stamped steel construction, patented turbulator cooling tubes and a zinc plated finish. Increases fluid capacity. Replacement pan gasket included.
Adds 1QT and 3oz. |
|
|
|
KS-14102 - Transmission Pan Cooler: GM Turbo 700R4 Deep Pan
Derale Transmission Pan Coolers use the air flowing beneath the vehicle to reduce fluid temperatures from 20°F to 50°F. Features include heavy-gauge stamped steel construction, patented turbulator cooling tubes and a zinc plated finish. Increases fluid capacity. Replacement pan gasket included. Will not fit applications with OEM deep pans.
Adds 1QT and 3oz. |
|
|
 |
KS-15502 - Heavy Duty Engine Oil Cooler Kit: Various Applications; 7.5" x 1
Heavy Duty Engine Oil Cooler Kit: Various Applications; 7.5" x 17" x 3/4"
Cool running from Derale.
Derale's tube-and-fin design for engine oil coolers rely on multiple passes through the cooler core to keep your oil from getting too hot and breaking down. This, in turn, means longer engine life. The coolers run your engine oil through a series of copper tubes that collect the heat and dissipate it to the surrounding air. Most coolers come with a thermostatically controlled sandwich adapter and a complete installation kit with 10 ft. of hose unless noted.
Heavy Duty Tube & Fin
Our high capacity 6-pass cooler features 1/2" seamless copper tubes expanded into 3/4" aluminum extraction, plastic edge guard protectors and an attractive black powder coated finish. Cooler size: 7.5" x 17" x 3/4". |
|
|
 |
KS-15706 - Oil Filter Relocation Kits Most Honda, Mazda & Mitsubishi 20x1.5
Oil Filter Relocation Kits
• Oil filter relocation kits allow you to move filter to a different location
• Faster and easier filter changes
• Ideal for engine swaps
• This is the same adapter as included in the complete kit, part number 15718. This is not a complete kit, you supply fittings and hose to finish off the adapter to fit to your application.
See Derale website for more info: http://www.derale.com/oil-filter-relocate.html |
|
|
 |
KS-15708 - Remote Oil Filter Mount: universal; single; ports up; 1/2" NPT p
Remote Oil Filter Mount: universal; single; ports up; 1/2" NPT ports; 3/4"-16 threads. Single Filter Mount, Ports Up.
. Oil filter relocation kits allow you to move filter to a different location
. Faster and easier filter changes
. Ideal for engine swaps
. 1/2" NPT ports for high flow
. Includes spin-on adapter, oil filter mount, 1/2" OEM-spec oil hose and all necessary hardware |
|
|
|
|
 |
KS-15716 - Oil Filter Relocation Kit: Most Gm Cars /Trucks; 13/16"-16 Threa
Oil Filter Relocation Kits for most GM cars and trucks.
. Oil filter relocation kits allow you to move filter to a different location
. Faster and easier filter changes
. Ideal for engine swaps
. 1/2" NPT ports for high flow
. Includes spin-on adapter, oil filter mount, 1/2" OEM-spec oil hose and all necessary hardware |
|
|
|
KS-15718 - Oil Filter Relocation Kit, Various Honda, Mazda, and Mitsubishi
Oil Filter Relocation Complete Kit: various years Honda various models, various years Mazda various models, various years Mitsubishi various models; 20x1.5mm thread
. Oil filter relocation kits allow you to move filter to a different location
. Faster and easier filter changes
. Ideal for engine swaps
. 1/2" NPT ports for high flow
. Includes spin-on adapter, oil filter mount, 1/2" OEM-spec oil hose and all necessary hardware |
|
|
 |
KS-15721 - In-Line Fan Thermostat: Oil Cooler; AN-8
The right part for the right job.
Derale in-line fan thermostats allow automatic electric fan controllers to attach to the inlet ports of the oil coolers. They activate the electric fans when fluid temperatures reach 180 degrees F, and shut off the fans when fluid temperatures reach 170 degrees F. |
|
|
|
KS-15800 - Electra Cool Remote Cooler: 16 Pass; AN-8 Inlets; 10" x 16" x 3
16 Pass Electra-Cool Remote Cooler with AN-8, 1/2" ID Inlets
The Electra-cool Remote Cooler combines a copper/aluminum core with a high flow Tornado electric fan for maximum cooling in any environment. Cooler cores have either AN-6 (3/8" ID) or AN-8 (1/2" ID) inlets, hose barb adapters are included if not using AN hose. Overall size 10" tall, 12-1/2" wide and 4" thick. Cooler kits include fan, cooler core and aluminum brackets only. Complete kits also include fan control thermostat, 10' of hose, mounting hardware and adapter fittings.
. Can be mounted anywhere
. Electric fan supplies optimum airflow
. Large capacity tube and fin cooler core
. 650 CFM 10" dia. reversible Tornado fan
. Anodized aluminum mounting brackets
. 16 Pass rated at 25,000 GVW
. 8 Pass rated at 17,500 GVW
Be sure your fluids are not overheating.
Derale's Electra-Cool remote fluid coolers combine a high-capacity oil-cooler core with a Tornado 10-inch electric fan for maximum cooling in any environment. This superior combination will give you the peace of mind of knowing that your fluids will be at their prime operating temperatures. These coolers feature a core with 1/2 in. copper tubes and 3/4 in. aluminum fins with plastic edge-guard protectors, all with a durable black powdercoat finish. Each fan is solidly mounted to the cooler core with clear-anodized billet-aluminum brackets to ensure a stable attachment. Coolers come in 8- or 16-pass models, with your choice of AN-type inlets and outlets. You can make these coolers even better with the fan thermostats and installation kits that are sold separately. |
|
|
|
KS-15830 - Econo Cool Remote Cooler: 6 Pass; 1/2" Inlets; 7 1/2" x 12" x 3
6 Pass Electra-Cool Remote Cooler
Econo Cool Remote Cooler: 6 Pass; 1/2" Inlets; 7 1/2" x 12" x 3 7/8"
Econo-Cool Remote Cooler
Our Econo-cool Remote Coolers combine a 6-pass, high-efficiency oil cooler core with a 400 CFM 7" Tornado electric fan for maximum cooling in a small package. The cooler core features 1/2" copper tubes and 3/4" aluminum fins with plastic edge guard protectors and comes with a black powder-coated finish. The electric fan mounts solidily to the cooler core with clear anodized billet aluminum brackets. 15,500 GVW. Installation kits and in-line fan thermostat sold separately.
Over all size" 7-1/2" x 12" x 3-7/8"
. Can be mounted anywhere
. Electric fan supplies optimum airflow
. High efficiency "Radiator Syle" fin and plate cooler core
. 400 CFM 7" dia. reversible Tornado fan
. Anodized aluminum mounting brackets
. Rated at 15,500 GVW
Big cooling in small spaces.
Looking for maximum fluid cooling that takes up minimal space? Derale's Econo-Cool remote fluid coolers are designed for just that dilemma. They combine a six-pass, high-efficiency fluid-cooler core with a 400-cfm, seven-inch Tornado electric fan for excellent cooling in a small package. Their cooler core features 1/2 in. copper tubes and 3/4 in. aluminum fins with plastic edge-guard protectors, all with a durable black powdercoat finish. Fans are solidly mounted to the cooler core with clear-anodized billet-aluminum brackets to ensure a stable attachment. These coolers work well with fan thermostats and installation kits that are sold separately. |
|
|
 |
KS-16507 - Tornado Series Electric Fan: 7"
Why buy an ordinary fan when you can have a Tornado?
Sure, Derale's Tornado electric cooling fans use a swept-wing blade to increase cooling efficiency, but that's not the only reason they'll boost your car's performance. Their unique design means that they can be used in pusher or puller fashion, and the special outer ring that links the blades effectively eliminates vibration. All of that means less of an amperage draw on your engine, and more available horsepower. In addition, by replacing your engine's belt-driven fan with a Tornado, you'll also reduce fuel consumption. Tornado Series Electric Fan: 7" |
|
|
 |
KS-16739 - Single stage controller, 3/8" NPT water jacket thread-in probe
.180 degree turn-on temperature, turn-off is 170 degrees
. Two probes available, 3/8" NPT water jacket thread-in or push-in radiator fin probe
. 30/40 Amp heavy-duty relay included in kit, necessary if electric fan draws over
10 Amps
. A/C override circuit included
. Designed for dual fans
. Maximum capacity: 25 Amps
Single stage controller, 3/8" NPT water jacket thread-in probe |
|
|
 |
KS-16741 - Installation Kit: electric fan complete installation and wiring
Installation Kit: electric fan complete installation and wiring kit
Everything you need to Install your fan on the radiator....from the fan mount and foam blocks to the toggle switch and wires...even the terminals for the wires. No need to hunt around the garage for what you need, its all here in a simple kit that is priced to make it as easy on your wallet as it is on your nerves! |
|
|
 |
KS-16743 - Electric Fan Mount Kit: Metal Rods with Pads
Electric Fan Mount Kit: Metal Rods with Pads. Mount your fan with metal rods rather than those pesky plastic rods. Its a sure fit and a tight mount that can withstand poundings from wheel stands at the starting line, jumps in that monster truck and anything else you can thro at them! Pads and rods included for an easy install in a few seconds time! |
|
|
|
|
 |
KS-16749 - Electric Fan Thermostatic Control Kit: Deluxe Adjustable; with R
Adjustable Fan Controller
. Adjustable turn-on temperature from 150 - 240 degrees
. Turn-off temperature 10 degrees less than turn-on
. Two probes available, 3/8" NPT water jacket thread-in or push-in radiator fin probe
. 30/40 Amp heavy-duty relay included in kit, necessary if electric fan draws over
10 Amps
. A/C override circuit included
. Designed for dual fans
. Maximum capacity: 25 Amps |
|
|
 |
KS-16759 - Electric Fan Thermostatic Control Kit: Deluxe Adjustable; with P
Adjustable Fan Controller
. Adjustable turn-on temperature from 150 - 240 degrees
. Turn-off temperature 10 degrees less than turn-on
. Two probes available, 3/8" NPT water jacket thread-in or push-in radiator fin probe
. 30/40 Amp heavy-duty relay included in kit, necessary if electric fan draws over
10 Amps
. A/C override circuit included
. Designed for dual fans
. Maximum capacity: 25 Amps
Adjustable controller with radiator fin probe
Electric Fan Thermostatic Control Kit: Deluxe Adjustable; with Pipe Thread Probe # 16759 |
|
|
 |
KS-16834 - Tornado Fan: Dual Electric; 2700 CFM; Black
Dual Tornado Fans
. Available with dual 12" or 14" Tornado Fans
. Sturdy metal mounting bracket with black powder
coated finish
. Reversible, will Push or Pull with equal efficiency
. Thermostatic switch's available here
Part# 16834, 2700 CFM, 1750 RPM, 21.0 Amp Draw. |
|
|
 |
KS-16938 - Dual Electric Fans: 4000 cfm; 1670 rpm; 50 amp draw; 28 1/2"Wx13
High Output Dual RAD Fans
When you demand maximum air flow for any application, the Derale High Output RAD fans are simply the best.
When removing the belt driven fan from your vehicle, you not only increase horsepower and torque, you increase fuel economy as well.
. Primary Cooling Dual Fan Assembly with High Output 265 Watt Motors
. Injection Molded Shroud with Pressure Relief
Vents and Stator Flow Directors
. Multiple Mounting Options
. Works As a Puller Fan Only
. Dual relay harness included
. Mounting kit included |
|
|
 |
KS-17015 - Heavy Duty Flex Fan: 15" Diameter; Standard Rotation; Stainless
Heavy Duty Flex Fans
Derale Heavy Duty Flex Fans provide maximum airflow at low RPMs when the vehicle speed provides little or no airflow through the radiator. At higher RPMs, the vehicle speed provides ample airflow and the fan blades flatten out to minimize engine loading, increasing horsepower and mileage. Fan spacer and nose cone kits sold separately.
. Improves Performance and Mileage
. OEM Quality Steel Hubs
. Durable Stainless Steel Blades
. Available in Standard or Reverse Rotation
. Large Surface Area Pulls More Air at Low Speeds
. Reinforced Blade Construction Extends Fan Life
. Chrome Plated or Black Powder Coated Hubs
2-3/4" Blade Depth |
|
|
|
KS-17017 - Heavy Duty Flex Fan: 17" Diameter; Standard Rotation; Stainless
Heavy Duty Flex Fans
Derale Heavy Duty Flex Fans provide maximum airflow at low RPMs when the vehicle speed provides little or no airflow through the radiator. At higher RPMs, the vehicle speed provides ample airflow and the fan blades flatten out to minimize engine loading, increasing horsepower and mileage. Fan spacer and nose cone kits sold separately.
. Improves Performance and Mileage
. OEM Quality Steel Hubs
. Durable Stainless Steel Blades
. Available in Standard or Reverse Rotation
. Large Surface Area Pulls More Air at Low Speeds
. Reinforced Blade Construction Extends Fan Life
. Chrome Plated or Black Powder Coated Hubs
2-3/8" Blade Depth |
|
|
|
KS-16749 - **Adjustable** Fan Control Thermostat: Transmission Cooler
Adjustable thermostatic switch for your fan cooled transmission cooler.
This is an adjustable auto on/off switch that will provide hands free operation of your fan mounted to your cooler. Adjustable to come on between 150 and 240 degrees. Once the fan comes on, it will cool to 12 degress under your power on setting. So, If you set the on temp using your gauge at 190 degrees, any time your fluid hit 190 the fan would activate automatically and cool the fluid down to 178 degrees and than turn your fan off. This is a very nice control unit that allows you to choose the fluid temp range that you wish to run within. |
|
|
Derale
