 |
Gallon-MT-10 - Muscle Products Inc MT-10 Gallon Containers
The Original Metal Treatment™
The keystone of the MPC line of specialty lubricants, additives and greases is MT-10 Metal Treatment™. It is the advanced technology, antifriction lubricant additive consisting of a blend of the highest quality petrochemical products. MT-10 contains no PTFE, graphite, moly, solid lubricants or silicone.
MT-10 has been formulated to increase the efficiency and performance of your automobile, truck or commercial vehicle. But in order to obtain the full benefit of the product, it requires dedicated interest on your part to follow product directions and take proper care of your vehicle. Oil changes, oil filters, gas filters, good grades of fuel, proper lube jobs, tune ups and qualified auto technicians performing maintenance and repairs all pay dividends toward the annual expense and the life of your vehicle.
MT-10 Metal Treatment™ is recommended for these automotive applications: Engines Transmissions (Automatic & Standard) Power Steering/Rack Assembly Units Differentials
--------------------------------------------------------------------------------
ENGINES ADVANTAGES
Smooths, seals & protects metal surfaces of bearings, pistons, cam, crankshaft, lifters & all other internal, moving metal parts Protects engine against friction-related heat & wear
Reduces operating temperatures
Increases horsepower
Extends the life of lubricated engine parts
Reduces oil consumption
Recommended for gasoline & diesel engines
--------------------------------------------------------------------------------
TRANSMISSIONS
One of the biggest enemies of a transmission is heat. The amount of heat present in the system will normally dictate the lifetime of that transmission. When MT-10 is added, heat is significantly reduced. MT-10 addresses the extreme-pressure (EP) areas, such as planetary and worm gear systems, along with bushings, bearings and shafts.
VALVE BODY OPERATION: In many cases presented by professional transmission builders, MT-10 has freed the valve body and maximized performance with no recurrence of sticking or intermittent hang-ups.
GOVERNORS: As most builders are aware, there are certain governor systems that have unique tendencies to hang up for no apparent reason. Two reasons these hang-ups occur are contaminants and microscopic spiking of the metal due to electrolytic corrosion of the metal. MT-10 will displace contaminants and smooth and seal metal surfaces, removing electrolytic spikes and preventing their formation.
ADVANTAGES
Lowers operating temperatures
Frees valve body for maximum performance
Eliminates governor hang-ups
Keeps oil passages, orifices & ball checks clean & fully operational
Extends the service life of the transmission
Eliminates premature failure and costly call backs
Reduces metal particle fallout & debris
Removes varnish buildup
Eliminates lock-up chatter in the torque converter
Insures proper shifts
Safe for seals & gaskets
No negative affect on sprag or clutch friction*
Recommended for automatic & standard transmissions
* Although MT-10 reduces friction, it has no negative affect on the sprag or clutch friction necessary for the operation of the transmission. As confirmed by Raymark in a letter of October 1986 in testing their SAE clutch pack: "The results of our test indicate no change in the friction levels, thus we do not expect the addition of your additive to have a negative effect on our friction products."
--------------------------------------------------------------------------------
POWER STEERING/RACK ASSEMBLY UNITS ADVANTAGES
Protects against friction-related heat & wear
Smooths, seals & protects metal surfaces
Reconditions rack piston & cylinders
Helps return smooth & easy operation to the unit*
*If you are experiencing difficulty with the unit, we recommend the unit be thoroughly flushed prior to the addition of MT-10.
--------------------------------------------------------------------------------
DIFFERENTIALS
ADVANTAGES
Treats the metal surfaces of the gears
Protects against friction-related heat & wear
Optimizes performance for more power
Extends the life of lubricated differential parts
NOTE: Limited slip additive is still required with the use of MT-10.
--------------------------------------------------------------------------------
HOW DOES IT WORK?
Carried to the moving metal parts by the fluid to which it is added, MT-10 creates a boundary film which smoothes and seals metal surfaces to reduce friction and friction-related heat. This results in less wear and smoother operation of the mechanism with no danger of build up or changes in tolerances. The end result is improved operation of the system.
MT-10 improves the overall tribological properties of the metal surfaces. Film strength is a function of surface roughness and viscosity. The smoother the surface, the higher the film strength, while viscosity can be lower to improve fluid flow conditions.
MT-10-treated surfaces will increase fluid film strength, reducing friction, heat, wear and energy consumption. This returns efficiency and previously wasted energy back to the system for increased power. This process, combined with the physical surface improvement of the metals, steps up oil flow, reduces metal film strength, improves the shear strength of the base lubricant, and results in an overall reduction in friction and friction-related wear. |
 |
|
 |
MT-10 16oz Bottles - Muscle Products Inc. MT-10 Metal Treatment 16 oz. bottles
MT-10 Metal Treatment™
Advanced technology, antifriction lubricant additive
The Original Metal Treatment™
The keystone of the MPC line of specialty lubricants, additives and greases is MT-10 Metal Treatment™. It is the advanced technology, antifriction lubricant additive consisting of a blend of the highest quality petrochemical products. MT-10 contains no PTFE, graphite, moly, solid lubricants or silicone.
MT-10 has been formulated to increase the efficiency and performance of your automobile, truck or commercial vehicle. But in order to obtain the full benefit of the product, it requires dedicated interest on your part to follow product directions and take proper care of your vehicle. Oil changes, oil filters, gas filters, good grades of fuel, proper lube jobs, tune ups and qualified auto technicians performing maintenance and repairs all pay dividends toward the annual expense and the life of your vehicle.
MT-10 Metal Treatment™ is recommended for these automotive applications:
- Engines
- Transmissions (Automatic & Standard)
- Power Steering/Rack Assembly Units
- Differentials
ENGINES
ADVANTAGES
- Smooths, seals & protects metal surfaces of bearings, pistons, cam, crankshaft, lifters & all other internal, moving metal parts
- Protects engine against friction-related heat & wear
- Reduces operating temperatures
- Increases horsepower
- Extends the life of lubricated engine parts
- Reduces oil consumption
- Recommended for gasoline & diesel engines
TRANSMISSIONS
One of the biggest enemies of a transmission is heat. The amount of heat present in the system will normally dictate the lifetime of that transmission. When MT-10 is added, heat is significantly reduced. MT-10 addresses the extreme-pressure (EP) areas, such as planetary and worm gear systems, along with bushings, bearings and shafts.
VALVE BODY OPERATION: In many cases presented by professional transmission builders, MT-10 has freed the valve body and maximized performance with no recurrence of sticking or intermittent hang-ups.
GOVERNORS: As most builders are aware, there are certain governor systems that have unique tendencies to hang up for no apparent reason. Two reasons these hang-ups occur are contaminants and microscopic spiking of the metal due to electrolytic corrosion of the metal. MT-10 will displace contaminants and smooth and seal metal surfaces, removing electrolytic spikes and preventing their formation.
ADVANTAGES
- Lowers operating temperatures
- Frees valve body for maximum performance
- Eliminates governor hang-ups
- Keeps oil passages, orifices & ball checks clean & fully operational
- Extends the service life of the transmission
- Eliminates premature failure and costly call backs
- Reduces metal particle fallout & debris
- Removes varnish buildup
- Eliminates lock-up chatter in the torque converter
- Insures proper shifts
- Safe for seals & gaskets
- No negative affect on sprag or clutch friction*
- Recommended for automatic & standard transmissions
* Although MT-10 reduces friction, it has no negative affect on the sprag or clutch friction necessary for the operation of the transmission. As confirmed by Raymark in a letter of October 1986 in testing their SAE clutch pack: "The results of our test indicate no change in the friction levels, thus we do not expect the addition of your additive to have a negative effect on our friction products."
POWER STEERING/RACK ASSEMBLY UNITS
ADVANTAGES
- Protects against friction-related heat & wear
- Smooths, seals & protects metal surfaces
- Reconditions rack piston & cylinders
- Helps return smooth & easy operation to the unit*
*If you are experiencing difficulty with the unit, we recommend the unit be thoroughly flushed prior to the addition of MT-10.
DIFFERENTIALS
ADVANTAGES
- Treats the metal surfaces of the gears
- Protects against friction-related heat & wear
- Optimizes performance for more power
- Extends the life of lubricated differential parts
NOTE: Limited slip additive is still required with the use of MT-10.
HOW DOES IT WORK?
Carried to the moving metal parts by the fluid to which it is added, MT-10 creates a boundary film which smoothes and seals metal surfaces to reduce friction and friction-related heat. This results in less wear and smoother operation of the mechanism with no danger of build up or changes in tolerances. The end result is improved operation of the system.
MT-10 improves the overall tribological properties of the metal surfaces. Film strength is a function of surface roughness and viscosity. The smoother the surface, the higher the film strength, while viscosity can be lower to improve fluid flow conditions.
MT-10-treated surfaces will increase fluid film strength, reducing friction, heat, wear and energy consumption. This returns efficiency and previously wasted energy back to the system for increased power. This process, combined with the physical surface improvement of the metals, steps up oil flow, reduces metal film strength, improves the shear strength of the base lubricant, and results in an overall reduction in friction and friction-related wear.
All metal treatments are oil additives, but most oil additives are not metal treatments.™ |
|
|
 |
MPC SL-10-16 - Muscle Products Inc SL-10 Oil Can Lubricant
SL-10 Oil Can Lubricant™
Heavy-duty, industrial spray lubricant & penetrating oil
Extreme-Pressure Lubricant in a Pump Spray Application
SL-10 Oil Can Lubricant™ contains a concentration of MPC's MT-10 Metal Treatment™ and emulsified PL-10 Power-Lift Grease™ to further enhance its lubrication qualities.
SL-10 exceeds the lubrication parameters of other spray lubricants and maintains its fine qualities in high corrosion and extreme humidity environments. Penetrating into hard-to-reach areas, SL-10 provides quick, positive, long-lasting lubrication on a broad spectrum of uses in industry, the automotive field, and domestically at home. SL-10 also provides excellent protection against rust and corrosion, while deeply penetrating to loosen seized and corroded mechanisms.
ADVANTAGES
- Provides optimum protection against rust & corrosion
- Offers quick, positive lubricating action
- Flows freely into remote, inaccessible areas
- Penetrates to loosen seized & corroded metal mechanisms
RECOMMENDED USES
- Metal mechanisms
- Metal-to-metal surfaces
- Chain drives
- Drag lines
- Bushings
- Pulleys
- Hinges
- Tools
- Sleeve bearings
- Open gears
- Steel cables
- Couplings
- Linkages
- Wheels
- Augers
- Rusty nuts & bolts
- Protection during long-term storage
- Any automotive, industrial or commercial areas of lubrication that require an external heavy-duty spray lubricant for accessible and hard-to-reach areas
|
|
|
|
MPC MO-10-16 - Muscle Products Inc. MO-10 Moist-Out Penetrating Oil and Demoisturant
MO-10 Moist-Out™
Demoisturant - Light lubricant - Penetrant
All in one product!
DEMOISTURANT
Excellent Penetrating Abilities Driving Out Moisture
MO-10 Moist-Out™ provides quick, thorough moisture displacement in damp or soaked electrical or electronic systems. A migrating film burrows under condensation and moisture, driving it to the surface where it dries or can be wiped off to reactivate circuits.
ADVANTAGES
- Provides quick, thorough moisture displacement
- Does not contain carbon tetrachloride
- Will not harm insulation
RECOMMENDED USES
- Wet/damp ignitions
- Electrical circuits
- Motors
- Controls
- Starters
- Electronic equipment
- Distributor & plug wires
LIGHT LUBRICANT
MO-10 Moist-Out™ offers long-lasting lubrication for a wide variety of applications, flowing and lubricating deeply into hard-to-reach internal areas. MO-10 contains MPC's MT-10 Metal Treatment™ for reduced wear and friction and increased performance of moving metal parts.
ADVANTAGES
- Offers quick, positive, long-lasting lubrication
- Flows & lubricates deeply into hard-to-reach areas
RECOMMENDED USES
- Metal mechanisms
- Gears
- Locks
- Hinges
- Metal-to-metal moving or sliding surfaces
- Levers
- Linkages
PENETRATING OIL
MO-10 Moist-Out™ penetrates quickly and effectively on even the most severe cases of rusted equipment, parts and components, dispersing into corroded areas to loosen scale and free up working mechanisms.
ADVANTAGES
- Penetrates quickly & effectively
- Loosens scale & frees up working mechanisms
- Does not affect painted surfaces
RECOMMENDED USES
- Rusty lugs or bolts
- Sluggish mechanisms
- Sliding parts
- Hinges
- Tools
- Products in storage
- Linkages
- Cams
|
|
|
|
Muscle Products Inc